6 720 607 800 (2016/02)
Use | 9
3Use
Fig. 3
[1] Reset button
[2] Temperature selector
[3] Main switch
[4] Burner state key
3.1 Before operating the appliance
▶ Ensure that the type of gas specified on the characteristics
panel is the same as that provided on the site.
▶ Open the gas valve.
▶ Open the water valve.
3.2 Connect and disconnect the appliance
Connect
▶ Turn the main switch to position I.
The panel shows the temperature to which the water will be
heated.
Fig. 4
Disconnect
▶ Turn the main switch to position 0.
CAUTION:
▶ The initial startup of the heater must be
realized by a qualified technician, who
will provide the client with all the
information necessary for its correct
usage.
To Next Page