Installation instructions
3 Installation instructions
3.1 Introduction
Please follow these instructions. Failure to follow
instructions may result in:
• Damage or injury.
• Improper operation.
• Loss of warranty.
Please contact BBT North America with any questions.
3,2 Proper location for installing your
heater
Carefully select the location of the water heater.
Follow the guidelines below:
• 1, Locate the heater where an adequate gas line size
and plumbing connections are feasible and
convenient,
• 2, The hot water lines should be kept short to save
energy. Centrally locating the water heater is best. It
is always best to have hot water lines insulated to
prevent the possibility of any freeze damage.
• 3. The water in this heater is cold and always remains
cold except for the times that hot water is being used.
The heater is equipped with freeze prevention
equipment that will operate and prevent freezing of
the water in the heater to 5°F with no wind chill,
Electrical power must be maintained to the heater to
allow this to function,
8 716 473 147 7
To Next Page
Loading...
