What causes my Bosch AQT 37-13+ motor to stop?
If your Bosch Pressure Washer motor stops, it could be due to: * A faulty or blown fuse. Replace the fuse. * An incorrect mains voltage. Check that the mains voltage matches the specifications on the model tag. * The motor protector activating. Allow the unit to cool for 15 minutes.
How to fix a Bosch AQT 37-13+ when the motor refuses to start?
If your Bosch Pressure Washer's motor won't start, there are several potential causes: * The plug might not be properly connected; ensure it is. * The mains socket could be faulty; try a different one. * The fuse might be blown; replace it. * A damaged extension cable could be the issue; try using the pressure washer without it. * The motor protector may have activated; allow the unit to cool for 15 minutes. * The unit might be frozen; wait for the pump, water supply hose, or accessory to thaw.
Why is the pressure pulsating on my Bosch AQT 37-13+?
If the pressure is pulsating in your Bosch Pressure Washer, the issue could stem from: * Air in the inlet water supply. Run the pressure washer with the spray handle open and the nozzle at low pressure until regular working pressure is achieved. * An inadequate water supply. Ensure the water supply meets specifications; the water supply hose should be at least 1/2" or 13 mm in diameter. * A blocked water filter. Clean the water filter. * Squeezed water supply hoses. Straighten any kinked hoses. * A high-pressure hose that's too long. Remove any high-pressure extension hoses; the maximum length is 7 m.
Why is my Bosch Pressure Washer not taking in detergent?
If your Bosch Pressure Washer isn't taking in detergent, consider these possibilities: * The adjustable nozzle might be on a high-pressure foam setting. Attach the High-Pressure Foam nozzle or select the appropriate setting on the 3-in-1 nozzle. * The detergent may be too dense. Dilute it with water. * A high-pressure hose extension might be in use. Fit the original hose. * There could be deposits or a restriction in the detergent circuit. Flush it with clean water and eliminate any restrictions.
Why does my Bosch AQT 37-13+ start but have no working pressure?
If your Bosch Pressure Washer starts but has restricted or no working pressure, consider the following: * Ensure there is a water supply and connect it if necessary. * The water filter may be clogged. Clean the water filter. * The nozzle may be clogged. Clean the nozzle.
What causes low but steady pressure in my Bosch Pressure Washer?
If the pressure on your Bosch Pressure Washer is too low but steady, the issue could be: * A worn nozzle. Change the nozzle. * A worn start/stop valve. Activate the trigger five times in quick succession.
Why does my Bosch AQT 37-13+ motor sound but fail to start?
If your Bosch Pressure Washer motor sounds like it's trying to start but fails, it could be due to: * Insufficient power supply. Verify that the voltage of the mains power supply line matches what's on the plate. * Voltage loss from using an extension cable. Check the specifications of the extension cable.
Explanation of safety symbols and general hazard alerts for user safety.
Provides essential safety warnings and instructions for safe operation of the pressure washer.
Details safe electrical connection, circuit protection, and power cord requirements.
Provides general advice for stable operation and avoiding damage to the unit or hose.
Explains how to use detergents effectively and the recommended cleaning steps.
Details how to use water from tanks or natural sources with the pressure washer.
Lists common problems and their corrective actions for the pressure washer.
Outlines essential maintenance procedures for ensuring longevity and reliable service.
Instructions on draining, cleaning, and storing the pressure washer for optimal preservation.
Information on using approved accessories and spare parts for safe operation.
Explains symbols related to machine operation, weight, pressure, and accessories.
Specifies the product's intended applications and operating environment conditions.
Advises on preventing environmental contamination from chemicals and proper waste handling.
Guidelines for environmentally friendly recycling and disposal of the pressure washer.
General| Form factor | Upright |
|---|---|
| Hose length | 6 m |
| Cable length | 5 m |
| Power source | Electric |
| Water filter | Yes |
| Product color | Black, Green |
| Maximum flow rate | 370 l/h |
| Working pressure (max) | 130 bar |
| Maximum input water temperature | 40 °C |
| Power consumption (typical) | 1700 W |
| Surface cleaner | - |
Weight and Dimensions| Weight | 6530 g |
|---|
To Next Page
