Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
NDP‑7602‑Z40 | NDP‑7602‑Z40L | NDP‑7604‑Z12L
en
User Manual

Bosch AUTODOME 7100i Specifications

General

Ingress Protection	IP66
Vandal Resistance	IK10
Sensor Type	1/2.8" CMOS
Day/Night	Yes
Video Compression	H.265, H.264, MJPEG
Bit Rate	Configurable
Network Interface	10/100 Base-T
Power Supply	PoE+ (IEEE 802.3at)
Lens Type	Motorized varifocal

Summary

Browser Connection

Establishing Connection

Details the steps to connect the camera to a network and access it.

Browser Operation

Live Page Operation

Details the live video display, image selection, and PTZ controls.

Searching Recorded Video

Explains how to search for specific recorded video clips.

Camera Configuration

General Settings

Provides general settings for the camera configuration.

User Management

Details how to create and manage user accounts and permissions.

Connectivity and Cloud Services

Manages cloud services and partner service connections for the camera.

Camera Settings

Configuration related to camera settings and hardware.

Encoder Stream Configuration

Configures stream prioritization, coding standards, and profiles.

Privacy Masks

Allows blocking specific areas of the scene from view.

Lens Settings

Configures focus, IR focus correction, and iris settings.

PTZ Settings

Controls auto pan, inactivity, number of sectors, auto pivot, freeze frame.

Pre-positions and Tours

Defines and manages preset scenes and camera movement tours.

Video Recording

Recording Configuration

Configures recording to iSCSI systems or local media cards.

Storage Management

Manages storage devices like iSCSI, local media, and their configurations.

Recording Profiles

Defines characteristics for recording tracks and assigns them to schedules.

Recording Scheduler

Links recording profiles to specific days and times for scheduling.

Alarm Configuration

Alarm Connections

Configures how the camera connects to predefined IP addresses during an alarm.

Video Content Analysis (VCA)

Provides an overview of VCA fields and setup.

Alarm Email Notifications

Configures the camera to send e-mails upon alarm events.

Alarm Input Configuration

Configures alarm triggers for the unit based on contact states.

Alarm Rules Configuration

Defines rules for inputs to activate outputs and trigger automatic responses.

Network Setup

Network Access Settings

Integrates the camera into an existing network, covering IP settings.

Network Management (SNMP & QoS)

Manages SNMP settings and quality of service for network traffic.

Service and Maintenance

Firmware Updates

Manages firmware updates and maintenance logs for the camera.

Logging and Diagnostics

Troubleshooting Guide

No Image or Poor Image Quality

Resolves issues with no image, dim image, weak contrast, flickering, or distortion.

No Video Output

Troubleshooting steps when no video is displayed.

Camera Control and Image Issues

Addresses camera control problems, dark images, and bright backgrounds.

Video Distortion and Noise

Privacy Mask and Network Connectivity Issues

Resolves privacy mask malfunctions and network connection problems.

Low Temperature Operation Issues

Frequent Camera Reboots

Hardware Reset

Steps for Hardware Reset

Detailed steps for performing a factory hardware reset on the camera.

Status Code Reference

Forbidden Zone and Internal Error Status Codes