Need help?Do you have a question about the Bosch FLEXIDOME indoor 5100i and is the answer not in the manual?
Details the steps and network configurations needed to connect the device.
Explains the process of setting a secure password for camera access.
Covers camera settings like sensor mode, image rotation, and lens configuration.
Covers alarm connections, video transmission, and VCA settings.
Settings for integrating the device into a network.
Provides access to maintenance, firmware updates, and configuration management.
General| Image Sensor | 1/2.8" CMOS |
|---|---|
| Frame Rate | Up to 30 fps at 1080p |
| Audio Compression | G.711, G.726 |
| Focal Length | 2.8 mm |
| Day/Night | True Day/Night |
| Minimum Illumination | 0.05 lux (color) |
| Video Compression | H.264, MJPEG |
| Ethernet | 10/100 Mbps |
| Protocols | IPv4, IPv6, HTTP, HTTPS, TCP, UDP, RTSP, RTP, RTCP, IGMP, ICMP, DHCP, DNS, DDNS, NTP, FTP, SMTP, UPnP, Bonjour, 802.1X, QoS, SNMP |
| Edge Storage | microSD card slot |
| Operating Temperature | +50°C |
| Power Supply | 12 VDC, PoE (IEEE 802.3af) |
| Resolution | 1920 x 1080 |
To Next Page