Need help?Do you have a question about the Bosch NDP-7512-Z30 and is the answer not in the manual?
General| Camera Type | Network Camera |
|---|---|
| Pan Range | 360° continuous |
| Video Compression | H.264, MJPEG |
| Audio Compression | G.711, G.726 |
| Ethernet | 10/100 Base-T |
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP, ICMP, ARP, RTSP, SMTP, DHCP, DNS, DDNS, NTP, FTP, UPnP |
Details how to connect the camera to the network via IP address and web browser.
Details how to configure the unit and application interface settings.
Explains user authorization levels, password management, and certificate use.
Main menu for camera configuration, including sensor mode, coding, and orientation.
Configures video encoding parameters, bit rates, and profiles for different streams.
Sets resolution, frame rate, and quality for primary and secondary video streams.
Configures encoding quality for specific regions within the video image.
Allows masking specific areas of the scene to prevent them from being viewed.
Configures autofocus, focus speed, and IR focus correction for optimal image clarity.
Controls pan, tilt, zoom, auto iris, and auto pivot functions for camera movement.
Defines and manages preset camera positions and sequences for automated movement.
Manages storage media, including iSCSI connections and media activation.
Defines and assigns characteristics for recording tracks used in schedules.
Configures how the camera responds to alarms, including connecting to predefined IP addresses.
Sets up and manages video analytics features for detecting events and triggering alarms.
Defines rules to link alarm inputs (e.g., motion detection) to specific outputs (e.g., AUX commands).
Overview and activation/deactivation of various network services like HTTP, FTP, SNMP.
Manages firmware updates, uploads, and downloads of camera settings.
Main interface for viewing live video, controlling PTZ, and managing streams.
To Next Page
