Bosch B5512 - Editing Existing User Details

Control Panels B92x/B91x Users menu | en
177
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
27.3 Edit User
Use the Edit User function to edit a user of your security system. You
need to know the user number for the user you want to edit.
Editing an existing user:
1. Open the Main Menu.
2. Use NEXT to go the Users menu option, and press ENTER, or simply
press [4].
3. Use NEXT to go to the Edit User menu option, and press ENTER, or
simply press [3].
4. Enter your passcode and press ENTER.
5. Enter the number (1 - 50) for the user you wish to edit, and press
ENTER.
6. The keypad shows the name for the user number you entered. Press
ENTER.
Configuring the user’s passcode:
1. Press [1] or ENTER to open the Configure Passcode menu.
2. Press ENTER to configure the user’s passcode.
3. Enter the user’s passcode and press ENTER.
4. Enter the passcode again and press ENTER. The keypad shows
Passcode changed and then returns to the previous menu.
Configuring the user’s name:
1. Use NEXT to go to the Configure Name option, and press ENTER, or
simply press [2].
2. Press ENTER to configure the user’s name.
3. The ESC key acts as a backspace key. Press ESC to delete the
characters. Press a number key repeatedly to scroll through the
number and letters shown on the key. To enter a space, press [0]