Control Panels B92x/B91x Settings menu | en
187
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
Enabling a disabled SKED:
1. With the SKED you wish to enable showing, press ENTER.
2. Press ENTER to continue.
3. Enter the new time in HH:MM format. If you make a mistake the
ESC key acts as a backspace key. Press ESC to delete the
characters and then enter the new numbers.
4. Press ENTER to save the time and choose AM or PM.
5. Press ENTER to select AM, or press NEXT and then ENTER to select
PM. The keypad shows Schedule update complete and then returns
to the previous menu.
6. Press ESC to exit the menu.
Disabling an enabled SKED:
1. With the SKED you wish to enable showing, press ENTER.
2. Press ENTER.to continue disable it. The keypad display indicates
that the SKED is disabled.
3. Press ESC to exit the menu.
To Next Page
Loading...
