en
|
12
|
Operating Instructions
|
BAT 135 Battery Tester
BAT 135 | REV. A | JANUARY 2018
Do the following to decode test codes:
1. Download the decoding software via: https://www.boschdiagnostics.com/pro/products/bat135
2. Click the icon labeled “BT/RTxxx” and the sheet below will appear.
3. Input the test code into the chart manually or by barcode scanner.
4. Test results will appear in the chart after decoding, as shown above.
Appendix C Decoding Test Codes
To Next Page
Loading...
