To Next PageTo Next Page
Need help?Do you have a question about the Bosch EFEP 60H and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | EFEP 60H |
| Category | Test Equipment |
| Language | English |
Essential safety guidelines for operating the Bosch testers to prevent injury and ensure proper usage.
Details the types of injection nozzles and tests that can be performed using the EFEP 60H and EFEP 67D testers.
Information on what is included with the testers and available optional accessories for enhanced functionality.
Technical specifications and details for the EFEP 60H and EFEP 67D testers, including gauge ranges.
Step-by-step instructions for the first-time setup and safe shutdown procedures for the test equipment.
Key conditions and prerequisites that must be met before commencing nozzle and holder assembly testing.
Procedures for cleaning new and used nozzles and their components using test oil or ultrasound cleaning.
Guidance on correctly attaching the nozzle and holder assembly to the tester, including torque specifications.
Defines the required test medium, oil temperature, and ventilation for accurate nozzle performance measurements.
Checks to perform on pressure lines and nozzles for mechanical damage before initiating tests.
Procedure to check for leaks at the nozzle and holder assembly at specific pressure levels.
Tests to verify the integrity of the nozzle and holder assembly against pressure drops according to standards.
Criteria for evaluating the spray pattern and the audible chatter of the nozzle needle during operation.
Instructions for routine maintenance, including filter replacement and rinsing the tester interior.
List of order numbers for essential spare and wearing parts for the EFEP 60H/67D testers.
Guidelines for transferring ownership or relocating the equipment, including documentation and packaging requirements.
Procedures for safely dismantling and disposing of the testers and their components in compliance with regulations.
Information regarding the pressure gauge specifications, referring to an overview on a previous page.
Details on the test oil tank capacity and filter specifications, including precision requirements.
Specific torque values for tightening various connections like pressure lines and adapters to the nozzle holder.
