EasyManua.ls Logo

Bosch BCC100 - Table of Contents

Bosch BCC100
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Contents
WARNING: Failure
to follow and read
all instructions
before installing or
operating this device
may cause personal
injury and/or
property damage.
IN THE BOX:
BCC100 Wi-Fi Thermostat
Screws (2) and Anchors (2)
Flathead Screwdriver
Wire Labels
Jumper Wire
User Guide
Customer Support Card
Some features require an
internet connection and a
user account. Features,
specifications, and
appearance are subject to
change without notice.
A C-wire (common wire) is
required to power the unit.
Two wire systems are not
supported. If a C-wire is not
available, please contact
your local Contractor for
support.
CHECK COMPATIBILITY FIRST
For conventional (gas/oil/electric)
Heat Only, Cool Only,
and Combined Heat & Cool
For heat-pump systems Up To 4-Heat & 2-Cool
Not compatible with other Bosch Boiler controls, such as the Logamatic
Getting Started.......................2
Main Screen............................9
Icons.....................................10
Initialization..........................12
Wi-Fi Setup...........................16
App Setup.............................19
Starting Your System............21
Temporary Scheduling..........23
Programming Schedules.......24
Additional Features
...............
26
Advanced Features...............30
Warranty
...............................
33
Connected Solution for 24VAC Thermostat Systems

Other manuals for Bosch BCC100

Related product manuals