Bosch BEA 850 - English

1 689 975 199 2009-09-25| Robert Bosch GmbH
10 | BEA 810/840/850 | de
Inhaltsverzeichnis
1. Symbols used 11
1.1 Documentation 11
1.2 BEA 810/840/850 11
2. Instructions for use 11
2.1 Important information 11
2.2 Safety instructions 11
2.3 Servicing 11
2.4 Test equipment 11
3. Interfaces 12
4. Faults 13
4.1 No communication with BEA 050
and/or RTM 430 13
4.2 No communication with the measurement unit 13
4.3 No speed signal 13
4.4 No temperature display 13
4.5 No battery voltage 13
4.6 No pressure display 13
4.7 No current display 13
4.8 Timing light not functioning 13
4.9 Remote control not possible 13
4.10 Operation with mouse not possible 13
4.11 No keypad operation 13
4.12 No display on monitor 14
4.13 No feedback from KTS 5xx 14
5. Checking 15
5.1 Checking power supply 15
5.1.1 KTS 5xx power supply 15
5.1.2 Measurement unit power supply 15
5.2 Checking temperature measurement input 15
5.3 Checking B+/B- input 15
5.4 Checking term. 1/term. 15 input 15
5.5 Checking clip-on trigger input 16
5.6 Checking input/multi measurement cable CH1 16
5.7 Checking timing light input 16
5.8 Checking USB connecting cable 16
6. Checking operation by way of software 16
6.1 Checking using RB system 16
6.2 Checking using RBSer32Test.exe 16
6.3 Checking using Windows control panel 16
7. Repair 17
7.1 Replacing measurement unit 17
7.2 Replacing monitor 17
7.3 Replacing computer unit 17
7.4 Replacing remote control receiver printed
circuit board 17