19
Bilinx bi-directional
communication technology
Remote programming – the convenience of Bilinx
Bilinx is the newest CCTV technology innovation
from Bosch. This bi-directional
communication capability is embedded in the video signal of Bosch Dinion
cameras. With Bilinx, technicians can check status, change camera settings
and even update firmware from virtually anywhere along the video cable.
Bilinx reduces service and installation time, provides for more accurate set-up
and adjustment, and improves overall performance. In addition, Bilinx uses
the standard video cable to transmit alarm and
status messages, providing
superior performance
without additional installation steps.
• Control AutoDome PTZ including pre-positions
• Adjust camera and dome configuration settings
• Cut and paste settings to multiple cameras remotely
• Receive alarm signals and motion detection
• Lower installation costs
• Plug and play – no need to address each camera
• Upgrade existing single cable installations easily
• Update camera firmware
To Next Page
Loading...
