Bosch CC610PB - Program Menu Tree

5Bosch Security Systems 3/23 BLCC610U
Solution 6000 User Guide
Program Menu Tree
Table 1: shows all of the system options in a tabular format. Each option can be access by pressing the Menu key and
then drilling down using the arrow and OK keys until the required option is listed on the display. A quick way to jump to
a particular option is to press the Menu key followed by the specific option number. You may be asked to enter your PIN
when accessing some options and some options are only available to users with Master Code authority.
Example:
To change the exit time, enter programming mode, then enter [MENU] + [2] + [8] + [0] and follow the on screen prompts.
1 Access 2 Areas 3 Inputs 4 Outputs
1-0 Commands 2-0 Commands 3-0 Command 4-0 Commands
1-0-0 Erase User 2-0-0 Area Status 3-0-0 Zone Status 4-0-0 Output Status
2-0-1 Turn Area On/Off 3-0-1 Zone Array 4-0-1 Turn Output On/Off
1-1 PIN Codes 2-0-2 Turn All Areas On 3-0-2 Bypass Zones 4-0-2 Output Array
1-1-0 Change Own PIN 2-0-3 Turn All Areas Off 3-0-3 Set Chime Zones
4-0-3
Door Status
1-1-1 Change Other PIN 2-0-4 Move To Area 3-0-4 Set Part 2 Zones 4-0-4 Door Array
1-1-2 Add PIN 2-0-5 Chime On/Off 3-0-5 Smoke Sensor Reset 4-0-5 Door Control
1-1-3 Delete PIN 2-0-6 Chime Mode
3-1 Zone Properties 4-1 Output Properties
1-2 Token 2-1 Area Properties 3-1-0 Zone Name 4-1-0 Output Name
1-2-0 Add Token 2-1-0 Area Name
1-2-1 Delete Token 2-1-6 Part Mode 1 Name 3-9 Input Testing 4-2 Door Control
1-2-2 Token Status 2-1-7 Part Mode 2 Name 3-9-0 Walk Test All Zones 4-2-0 Door Name
1-2-3 Edit Token 2-1-8 Auto Arming 3-9-1 Walk Test A Zone
4-9 Output Testing
1-3 RF Keyfob 2-8 Timers 4-9-0 External Siren Test
1-3-0 Add Keyfob 2-8-0 Exit Time 4-9-1 Internal Siren Test
1-3-1 Delete Keyfob 2-8-1 Entry Time 1 4-9-2 Strobe Test
2-8-2 Entry Time 2 4-9-3 Fire Siren Test
1-4 User Properties 2-8-3 Part Entry Time
1-4-0 User Name
1-4-1 Area Assignment
1-4-2 User Options
1-4-4 TimeZone Access
1-4-5 Door Assignment
1-4-6 User Expire Date
1-8 Fingerprint
1-8-0 Add Fingerprint
1-8-1 Delete Fingerprint
1-8-2 Fingerprint Status
5 Comms 6 Devices 7 System
5-0 Commands 6-0 Commands 7-0 Commands
5-0-1 Call/Answer RAS 6-0-0 Device Status 7-0-0 Panel Status
5-0-2 Call Forward On/Off 6-0-7 Keypad Volume 7-0-1 System Trouble
5-0-3 Check Web Email 6-0-8 Keypad Contrast 7-0-2 History Log
5-0-4 Email System Log 6-0-9 Keypad Backlight 7-0-6 TimeZone Array
5-0-5 Start Direck Link
5-0-6 Voice Setup 6-1 Keypads & Readers 7-1 Clock
5-0-8 Register Customer 6-1-0 Name 7-1-0 Set Date And Time
6-1-9 WiFi Settings
5-1 Telephone Numbers 7-4 Siren
5-1-1 Destination 1 6-5 GSM/GPRS Module 7-4-2 Volume
5-1-2 Destination 2 6-5-0 GSM/GPRS Status
5-1-6 Call Forward On 6-5-5 CLI Triggers 7-5 TimeZones
5-1-7 Call Forward Off 6-5-6 SMS Control 7-5-0 Name
7-5-1 Time
5-5 MyAlarm 7-5-2 Day
5-5-8 Email Address 7-5-3 TimeZone Options
5-5-9 Email Options
7-6 Holidays
5-7 IP Remote Access 7-6-0 Holiday Name
5-7-0 IP Address 7-6-1 Start Stop Dates
5-7-1 IP Port
7-7 System Options
5-9 Comms Test 7-7-3 Keypad Hi/Lo Temp
5-9-0 Send Test Report 7-7-7 Site Name
7-9 System Testing
7-9-0 Walk Test All Zones
7-9-1 Battery Test
Table 1: Control Panel Menu Tree