Need help?Do you have a question about the Bosch ICP-CP508 and is the answer not in the manual?
General| Part Number | ICP-CP508 |
|---|---|
| Type | Control Panel |
| Input Voltage | 16.5V AC |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Compatibility | Compatible with Bosch wireless and wired devices |
| Battery Backup | 12V 7Ah |
| Number of Zones | 8 |
| Communication | PSTN |
| Humidity | Up to 85% non-condensing |
Illustrations and diagrams of the ICP-CP508W LED and ICP-CP508LW LCD codepad displays.
Explains the meaning of zone indicators (1-8) for the ICP-CP508W LED codepad and their status.
Details the function and status indications of the STAY indicator on the ICP-CP508W LED codepad.
Describes the MAINS indicator's role in showing AC power status and its use in programming modes.
Covers the FAULT indicator, its meaning for system faults, and acknowledgment procedures.
Explains the AWAY indicator's function and status when the system is armed in AWAY Mode.
Lists and defines the various audible beeps and tones provided by the codepad for system feedback.
Details the status indications for zones 1-8 on the ICP-CP508LW LCD codepad.
Explains the AWAY indicator's function and status on the ICP-CP508LW LCD codepad.
Describes the STAY indicator's role and status on the ICP-CP508LW LCD codepad.
Explains the indicator that appears when the system is disarmed.
Defines the MAINS indicator's function for AC power status on the LCD codepad.
Covers the OFF indicator, its meaning when disarmed, and when zones are unsealed.
Instructions for arming the security system in AWAY Mode using two different methods.
Procedure for disarming the system when it is armed in AWAY Mode.
Details on how to arm the system in STAY Mode 1 and STAY Mode 2.
Steps to disarm the system when it is armed in STAY Mode 1 or STAY Mode 2.
Step-by-step guide to adding new user codes to the security system.
Instructions for removing existing user codes from the system.
Procedure for standard zone isolation, allowing all users to disable zones without a code.
Method for isolating zones using a valid user code.
To Next Page