Operation
Climate 3000i – 6721823682 (2021/02)
54
Table 4 Keys on remote control
Remote control display
Table 5 Symbols in the display
3.3 Using the remote control
The signal range is 8 m. If objects are in the way or certain fluorescent
lamps are used in the same room this can affect transmission of the
signal.
▶ Point the remote control towards the signal receiver window of the
unit and press the desired key.
The unit emits a beep when it receives a signal.
NOTICE
The remote control may be permanently prevented from working
correctly.
▶ Do not expose the remote control to direct sunlight.
▶ Do not leave the remote control near a heating appliance.
▶ Protect the remote control from moisture and impacts.
Pos. Key Function
1 K Switch on/off
Mode Set operating mode
Eco operation mode
2 SET Select advanced operating functions
OK Confirm choice
Setting timer
. Increase temperature
/ Reduce temperature
3 Fan speed
Swing Set swing function
Indirect airflow (Wind avoid me)
Turbo Turbo cool/Turbo heat
LED Switch off display of indoor unit and alarm buzzer
(Mute Mode)
Clean Self-cleaning (I clean)
Pos. Symbol Explanation
1 Operating function: indirect airflow is active (Wind
avoid me).
Infographic: self-cleaning is active (I clean).
Without function.
Operating function: sleep mode is active.
Operating function: follow me function is active
(Follow Me); temperature measurement at the
remote control.
Infographic: wireless control function.
Infographic: battery status
2 Operating mode: automatic mode
Operating mode: cooling mode
Operating mode: dehumidification mode
Operating mode: heating mode
Operating mode: fan mode
3 Value display: shows the set temperature, fan speed
or (when timer is activated) the timer setting as
standard.
Infographic: transmission indicator, lights up when
the remote control sends a signal to the indoor unit.
Infographic: energy saving function active.
Infographic: energy saving function active.
Infographic: ON/OFF timer active.
Infographic: noise reduction is active (Silent Mode).
Value display: shows the current fan speed. There are
10 different output stages and the AUTO setting for
automatic control.
4 Infographic: automatic vertical swing function is
active (up/down).
Infographic: Turbo cool/Turbo heat is active.
To Next Page
Loading...
