RDCI Series – All DC Inverter Outdoor Units
6 720 862 437 (2016/10)
CONNECTING PIPES TO SBOX | 13
3) Branch joints must be installed horizontally at an angle of no more
than 10 degrees.
4) Ensure you install branch assembly joints correctly to stop the build
up of oil.
6. CONNECTING PIPES TO SBOX
Fig. 5-10
× Wrong way
Fig. 5-11
U-shaped branching pipe
A direction view
Horizontal surface
Wrong Correct
Fig. 5-12
Fig. 5-13
Fig. 6-1
Gas pipe (Ø15.9/Ø12.7)
Liquid pipe (Ø9.5/Ø6.4)
Low-pressure gas pipe (Ø25.4)
High-pressure gas pipe (Ø19.1)
Liquid pipe (Ø12.7)
SBOX02-1
SBOX02E-1
Fig. 6-3
Fig. 6-2
Gas pipe (Ø15.9/Ø12.7)
Gas pipe (Ø15.9/Ø12.7)
Liquid pipe (Ø9.5/Ø6.4)
Liquid pipe(Ø9.5/Ø6.4)
Low-pressure gas pipe (Ø31.8)
Low-pressure gas pipe (Ø31.8)
High-pressure gas pipe (Ø22.2)
High-pressure gas pipe (Ø22.2)
Liquid pipe (Ø15.9)
Liquid pipe (Ø15.9)
SBOX04-1
SBOX06-1
SBOX04E-1