Manual Operation (Without Remote)
6 720 866 141 (2016/07) Bosch Climate 5000
2. Manual Operation (Without Remote)
2.1. How to operate your unit without the remote control
In the event that your remote control fails to work, your unit can be
operated manually with the MANUAL CONTROL button located on the
indoor unit. Note that manual operation is not a long-term solution, and
that operating the unit with your remote control is strongly recommended.
WARNING
BEFORE MANUAL OPERATION
Unit must be turned off before manual operation.
To operate your unit manually:
1 Open the front panel of the indoor unit.
2 Locate the MANUAL CONTROL button on the right-hand side of the
unit.
3 Press the MANUAL CONTROL button one time to activate FORCED
AUTO mode.
4 Press the MANUAL CONTROL button again to activate FORCED
COOLING mode.
5 Press the MANUAL CONTROL button a third time to turn the unit off.
6 Close the front panel.
CAUTION
The manual button is intended for testing purposes and emergency
operation only. Please do not use this function unless the remote is lost
and it is absolutely necessary. To restore regular operation, use the
remote control to activate the unit.
Figure 2-1
To Next Page
Loading...
