Need help?Do you have a question about the Bosch Conettix DX4020 and is the answer not in the manual?
General| Model | DX4020 |
|---|---|
| Maximum Number of Wireless Zones | 32 |
| Enclosure | Metal |
| Maximum number of keypads | 8 |
| Communication | PSTN |
| Number of Hardwired Zones | 8 |
Mount the DX4020 inside the control panel enclosure using standard three-point mounting patterns.
Connect DX4020 data bus terminals to the compatible control panel's data bus terminals.
Details DIP switch settings for GV2, G, and 9000 Series control panels.
Explains DIP switch configuration for DS7240V2, DS7220V2, and Easy Series V3+ control panels.
Configuration for DS7400Xi control panel using Option Bus Addresses 13 and 14.
Configuration for FPD-7024 control panel using Option Bus Address 250.
Identifies and describes the DX4020's bus and serial status LEDs.
Describes the bi-color LEDs on the XPort connector indicating link status and activity.
Details the default IP settings shipped with the DX4020, including DHCP.
Explains how to locate and identify the DX4020's unique MAC hardware address.
Guidance on obtaining an IP address from the network administrator.
Steps to assign an initial IP address to the DX4020 module.
Overview of the ARP command for temporarily assigning an IP address to hardware.
Detailed steps on using the ARP command to link IP to MAC addresses.
Instructions for completing network configuration using Telnet.
Step-by-step guide for configuring the DX4020 using Telnet on Windows 98.
Step-by-step guide for configuring the DX4020 using Telnet on Windows 2000/XP.
To Next Page