Need help?Do you have a question about the Bosch CL500 and is the answer not in the manual?
Defines requirements for safe operation and trained personnel for product use and maintenance.
Details specific safety warnings for product operation, including emergency-OFF, modifications, and electrical hazards.
General introduction to hardware features and explanation of the COM-E module's power supply.
Details the V.24/20mA and Ethernet interfaces, including their specifications and supported protocols.
Describes the components and indicators on the COM-E module's front panel, such as status displays and LEDs.
Explains essential COM-E settings made prior to commissioning, managed via DIP switches.
Details how the COM-E module occupies system bus blocks and how its block address is set.
Explains protocol-specific settings for channel 0 managed by DIP switches S3 and S6.
Explains Ethernet address configuration and modification possibilities via the configuration file.
Explains how presettings and default values on the COM-E can be changed using a configuration file.
Describes how a password protects writing access to the controller during COM-E communication.
Lists the technical specifications of the COM-E module, including interfaces, power, and environmental ratings.
Defines requirements for safe operation and trained personnel for product use and maintenance.
Details specific safety warnings for product operation, including emergency-OFF, modifications, and electrical hazards.
General introduction to hardware features and explanation of the COM-E module's power supply.
Details the V.24/20mA and Ethernet interfaces, including their specifications and supported protocols.
Describes the components and indicators on the COM-E module's front panel, such as status displays and LEDs.
Explains essential COM-E settings made prior to commissioning, managed via DIP switches.
Details how the COM-E module occupies system bus blocks and how its block address is set.
Explains protocol-specific settings for channel 0 managed by DIP switches S3 and S6.
Explains Ethernet address configuration and modification possibilities via the configuration file.
Explains how presettings and default values on the COM-E can be changed using a configuration file.
Describes how a password protects writing access to the controller during COM-E communication.
Lists the technical specifications of the COM-E module, including interfaces, power, and environmental ratings.
General| Product type | Control Unit |
|---|---|
| Series | CL500 |
| Operating voltage | 24 VDC |
| Protection class | IP40 |
| Number of Inputs | 8 |
| Operating Temperature | -20°C to +60°C |
| Communication interface | CAN |
To Next Page