Hardware
2--1
1070 072 196-101 (00.06) GB
2 Hardware
The COM-E module is provided with a serial V.24/20 mA interface and an
Ethernet interface (10Base-T) which make it possible to couple the CL400 /
CL500 controllers with other Bosch controllers or other communication-ca-
pable devices.
Power Supply
The COM-E does not require an external power supply. All supply voltages
are provided by the CL400 / CL500’s power supply unit.
Compatibility with R500P, R500MAP, R500M-EN and COM-P
The COM-E’s hard- and software concept makes it possible to operate the
COM-E in combination with the COM-P, R500P, R500, R500MAP, and
R500M-EN modules in the CL400 / CL500 basic device.
To address the COM-E from the PLC program, the function modules for com-
puter interfaces are to be linked to the PLC program.
To Next Page
Loading...
