Bosch CL500 - Command Description for Central Units; Field Commands

General Information Regarding BUEP-E and BUEP19E
7--10
1070 072 196-101 (00.06) GB
7.2 Command Description for Central Units
It is distinguished between field commands and special commands.
7.2.1 Field Commands
Data Field 43
H
Command Data Field
Command code 43
H
Command attribute FFFFH
Address high part Block address
Address low part Byte address 0 to 24k
Type of operand all
Data Module without Header 44
H
Command Data Module without Header
Command code 44
H
Command attribute DM number 0 to 255 (511)
1
Address high part Block address
Address low part Byte address 0 to 511
Type of operand all
1) with relevant ZS configuration, starting at RAM module 256 kB.
Marker 4D
H
Command Marker
Command code 4D
H
Command attribute 0
Address high part Block address
Address low part Byte address 0 to 255
Type of operand all
Data Buffer 64
H
Command Data Buffer
Command code 64
H
Command attribute 0
Address high part Block address
Address low part Byte address 0 to 511
Type of operand all