Bosch CL500 - COM-E Settings and DIP Switches

Hardware
2--7
1070 072 196-101 (00.06) GB
2.5 Settings on the COM-E
The settings must be made prior to the COM-E’s commissioning.
CAUTION
Danger to the module!
All ESD protection measures must be observed when using themod-
ule! Prevent electrostatic discharges!
DIP Switch Explanation
S2 Setting the block address
S3 Protocol-specific setting channel 0
S4 Reserved
S5 Reserved
S6 Multiswitch
S2 S3 S4 S5 S6