7/18
Bosch Rexroth Canada ı 07.22.2013 ı Revision 2.0
Press the Gate Position again to verify the selection.
3.7 Error Messages
During the operation when an error occurs, a message will appear in the centre of
the screen. Tap anywhere on the message to clear the window.
4 Symbol Actions
All symbols on the right of the screen require a press and hold for >1 seconds.
4
44
4.1
.1 .1
.1 Error
Error Error
Error Log
LogLog
Log/Diagnostic
/Diagnostic/Diagnostic
/Diagnostic
When the vehicle is stationary press the ‘Gear
‘Gear‘Gear
‘Gear’
’’
’ symbol to display most recent error
messages. If a hydraulic pressure&temperature sensor is connected both readings
will be displayed on the bottom right of the screen.
To Next Page
Loading...