To Next PageTo Next Page
Need help?Do you have a question about the Bosch CSG15 and is the answer not in the manual?
General| Weight | 2.9 kg |
|---|---|
| Voltage | 120V |
| Type | Angle Grinder |
| Power Source | Corded Electric |
| No-load Speed | 8500 rpm |
| No Load Speed | 8500 rpm |
| Disc Diameter | 150 mm |
| Amperage | 12.5 amps |
| Wheel Diameter | 150 mm |
| Spindle Thread | 5/8-11 in |
Keep work area clean and well lit. Avoid explosive atmospheres and keep bystanders away.
Ensure proper plugs, avoid grounded surfaces, protect from moisture, and use appropriate extension cords.
Stay alert, use PPE, prevent unintentional starting, maintain balance, dress properly, and use dust collection.
Use the correct tool, do not force it, ensure the switch works, and disconnect before adjustments.
Use face shield, safety goggles, dust mask, hearing protectors, and gloves as appropriate.
Maintain a safe distance from the work area; ensure anyone entering wears personal protective equipment.
Hold the tool by insulated gripping surfaces only to avoid electric shock.
Understand kickback as a sudden reaction and take precautions to resist it.
Use recommended wheels and guards, and follow specific safety rules for grinding operations.
Use proper guards with diamond cup wheels, dry diamond wheels, correct size wheels, and auxiliary handles.
Use GFCI, keep handles dry, secure workpiece, perform maintenance, and wear hearing protection.
Identifies and illustrates the main parts and features of the concrete surfacer.
Lists model number and dry diamond cup wheel diameter specifications for the tool.
Step-by-step instructions for removing and installing dry diamond cup wheels.
Instructions for operating the on/off switch, including locking it in the 'ON' position.
Explains the feature that prevents uncontrolled restarting after power interruption.
Describes the electronic system for maintaining constant speed and soft start.
Details the tool's overload protection and how to respond if it activates.
Instructions for performing flush grinding near edges using the dust shroud.
Requirement to use dust extraction system and how to connect a vacuum hose.
Advice on tool usage, such as holding with both hands and sharpening wheels.
Information on extension cords and a list of accessories.
Recommends authorized service for repairs and maintenance to prevent hazards.
Instructions for removing and installing the brush ring.
Notes that the tool is pre-lubricated and suggests regreasing gears during brush changes.
Recommends examining carbon brushes every 2-6 months using genuine Bosch parts.
Advises replacing bearings after 300-400 hours or every second brush change.
Instructions on cleaning the tool using compressed air and safety precautions.
