Bosch CT 100 - 5 Operation; 5.1 Central Heating and Temperature Setting

6720816118 (2015/08) Bosch Control
8 | Operation
• If all connections are made, the data is synchronised.
• The display will now show the basic screen.
Fig. 12 Basic screen
▶ Download the Bosch Control App to your smart device from
either:
▶ Install the Bosch Control App onto your smart device
▶ Make a connection to the Bosch Control from your smart
device
▶ Register the App with the Bosch Control website.
▶ Enter the unique access code ( label on the front page).
▶ Set a personal password, of your choice, and record this on
the front of these operating instructions.
5Operation
The touch screen is intended for limited manual operation, for
all other operations and programming the Bosch Control App
on your smart device must be used.
5.1 Central Heating
5.1.1 Changing temperature setting
The touch screen lights up when approached. Changing the
temperature may be done in the following 3 ways.
Swipe
Fig. 13 Swipe
▶ Swipe down or up to change the temperature to change the
temperature by 1 degree.
Fig. 14 Tap
▶ Tap above or below the temperature shown to change the
temperature by 0.5 degree.
Problem with making the connections?
Refer to the Troubleshooting guide on page 11
In the App store the Bosch Control application is
found in the iPhone section of the store, but can
be installed on an iPhone or iPad.
6720816118-3.1TD
0
70
0
69
0
70
0
71
0
69
0
69
70
7
9
0
0
0
0
0
6720816118-10.1TD
0
69
0
70
071
0
69
6720816118-4.1TD