D1265 | User's Guide | Part I: Security System Basics
Bosch Security Systems | 9/10 | F01U169131-02 11
How Your System Reports Alarms
Your security system might be programmed to
automatically seize your telephones when sending
reports to your security company. Once the report is
completed, your security system restores the telephone
line to normal operation (check with your security
company). Other methods of communicating alarm
conditions are also available. Please consult your
security company for services available in your area.
Your system makes repeated attempts to send reports
to your security company.
Notify your security company of the communications
failure. In the event your security system fails to
communicate, the keypad sounds a Trouble Tone and
shows Comm Fail Route Grp1 (where the Route
Group can be 1, 2, 3, or 4):
Notify your security company of the communications
failure.
If your system uses telephone lines as its
means of communication and telephone
service is interrupted, your security
system cannot send reports to your
security company unless it has an
alternate means of transmitting them.
To Next Page
Loading...
