Bosch D1265 - Page 38

D1265 | Owner's Manual | Part III: Advanced Commands
38 Bosch Security Systems, Inc. | 9/10 | F01U169130-02
Enter the new time using a 12-hour (HH:MM)
format.
Example: If the desired time is 12:34, press 1
+ 2 + 3 + 4
The Set Date button disappears when the
first digit is entered.
5. Press the ENTER button.
6. The display changes to show AM or PM
buttons.
Press the AM button to select AM.
Press the PM button to select PM.
7. The display shows Enter new date.
Refer to Step 9 for use of the Time/Date
Display button.
If you input the wrong date, press the Exit button to
clear the date.
Enter the new date using a MM/DD/YY
format.
Example: If the desired time is July 28, 2010,
press 0 + 7 + 2 + 8 + 1 + 0.
8. Press the ENTER button.
The Time/Date Display button is used to show
how the time and date entered appears.
9. The new time and/or date is shown for 20 sec
before the display returns to idle text.
Press the Exit button to return to idle text.