D1265 | Owner's Manual | Part I: Security System Basics
Bosch Security Systems, Inc. | 9/10 | F01U169130-02 9
Your Custom Display
“At an idle state” means that the system is not currently performing a function entered by a user. There are three
idle states the system might be in:
Turned on (Armed)
Turned off (Disarmed) with no points faulted (doors or windows open) in the area
Turned off with faulted points (doors or windows open) in the area. This manual uses the default idle state
shows for examples of these idle states. Your security company might have programmed custom text for the
idle shows in your system. The custom text and the default text for the three system idle displays follow.
Default Text Custom Text
Area Name Text
Appears on the top line of the display
and is customizable using Remote
Programming Software (RPS)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Throughout this manual, all examples of “AREA # NAME TEXT” use “AREA 1 WAREHOUSE.” The
actual name of Area 1 differs depending on the specifics of your system.
Area Is On Text
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Area Off Text
Indicates the area is turned off
(disarmed). 24-hour points remain
armed.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Area Not Ready Text
Indicates that the area is turned off,
but not ready to arm.
The Silence button only appears if the trouble tone is sounding.
To Next Page
Loading...
