To Next PageTo Next Page
Need help?Do you have a question about the Bosch DCU 100 and is the answer not in the manual?
Provides essential information on copyright, liability, warranty, user obligations, and critical safety instructions.
Specifies the DCU 100 as a tablet for workshop use with Bosch diagnostic and emissions analysis software.
Steps for initial DCU 100 setup, including language selection and Windows start screen.
Procedure for installing and licensing the ESI[tronic] 2.0 software on the DCU 100.
Instructions for powering on the DCU 100, including acclimatization advice and using the stylus.
Details methods for safely shutting down the DCU 100, including standard shutdown and forced shutdown.
Procedure for calibrating the touch screen using the eGalaxTouch application for accurate input.
Addresses common faults like the DCU 100 not turning on or not responding, and suggests solutions.
Detailed warning and procedure for safely replacing the DCU 100's storage battery to prevent explosion risks.
Comprehensive technical properties of the DCU 100, including display, OS, memory, interfaces, and dimensions.
General