Bosch FCP‑320 Series User Manual

Conventional Automatic Fire Detectors Installation | en 9
Bosch Sicherheitssysteme GmbH
User manual
2021.03 | 11 | F.01U.004.377
4 Installation
4.1 Overview of Detector Bases
The FCP-320/FCH-320 Series detector head is used in one of the following listed detector
bases, which are suitable for both flush-mounted and surface-mounted cable feed. They have
separate attachment points for ceiling mount/flush-mounted back boxes. In addition, they fit
all standard bore patterns.
The detector bases are made from white ABS plastic (color similar to RAL9010) and have a
matte surface finish.
The bases have screw terminals for connection of the detector and its accessories to the fire
panel. Contacts connected with the terminals provide for a secure electrical connection when
mounting the FCP-320/FCH-320 detector heads. Cables up to 2.5mm
2
can be used.
To protect against unauthorized removal, the detector head can be secured with a variable
locking.
MS400
The MS400 Detector Base is the standard detecor base. It has
seven screw terminals.
MS400B
The standard MS400 Detector Base with Bosch-branding.
FAA-420-SEAL
Seal for using the MS400 and MS400B detectors in a humid
environment. The TPE seal protects the detector reliably against
the penetration of condensed water.
MSR320
The MSR320 Conventional Detector Base with Relay is provided
with an integrated relay that has NO/C/NC contacts for switching
applications (e.g. non EN-54 third party applications, dampers,
door holders, etc.).

Bosch FCP‑320 Series Specifications

General

Brand	Bosch
Model	FCP‑320 Series
Category	Security Sensors
Language	English