16 en | Accessories Conventional Automatic Detectors
F.01U.002.707 | 8.0 | 2011.10 Operation Guide Bosch Sicherheitssysteme GmbH
5 Accessories
5.1 EOL Module for Line Termination According to EN 54-13
5.2 Support Plates for Detector Identification
The support plates are made from 1.8mm thick ABS plastic and are clamped between the
detector base and the ceiling.
5.3 SK 400 Protective Basket
FLM-320-EOL2W EOL-Modul
The FLM-320-EOL2W EOL module is a 2-wire moduel for
terminating a conventional line according to EN 54-13.
It detects faults in the line according to EN 54-13 and
transmits a notification to the fire panel display.
For a conventional connection according to EN 54-13 one
line must not contain more than 32 automatic detectors.
TP4 400 Support Plate
The TP4 400 Support Plate is intended for an installation
height up to 4 m and is designed for labels up to a size of
approximately 65 x 34 mm.
TP8 400 Support Plate
The TP8 400 Support Plate is intended for an installation
height up to 8 m and is designed for labels up to a size of
approximately 97 x 44 mm.
15 / 4
The SK 400 Protective Basket is installed over the detector
and gives the detector substantial protection against
damage.
If the detector is mounted in a sports facility, for example,
the protective basket prevents balls or other sports
equipment from hitting the detector and damaging it.
To Next Page
Loading...
