Bosch FCP-320 - Default Chapter; Table of Contents

Conventional Automatic Detectors Table of Contents | en 3
Bosch Sicherheitssysteme GmbH Operation Guide F.01U.002.707 | 8.0 | 2011.10
Table of Contents
1 Product Description 5
2System Overview 6
2.1 Configuration of the Detector 6
2.2 Functional Description of Sensor Technology 6
2.2.1 Optical Sensor (Smoke Detector) 6
2.2.2 Thermal Sensor (Heat Detector) 6
2.2.3 Chemical Sensor (Gas Sensor) 6
2.3 System Description 6
2.4 Features 7
3 Planning 8
3.1 Basic Planning Guidelines 8
3.2 Use in Fire Barriers Conforming to DIBt 8
4 Installation 9
4.1 Overview of Detector Bases 9
4.2 Mounting the Bases 11
4.3 Wiring 12
4.3.1 Wiring the MS 400/MS 400 B 12
4.3.2 Wiring the MSR 320 13
4.4 Detector Base Sounder 14
4.5 Installing the Detector Head 14
4.6 Detector Removal 15
5 Accessories 16
5.1 EOL Module for Line Termination According to EN 54-13 16
5.2 Support Plates for Detector Identification 16
5.3 SK 400 Protective Basket 16
5.4 SSK 400 Protective Dust Cover 17
5.5 MK 400 Detector Console 17
5.6 MH 400 Detector Heating Element 17
5.7 External Detector Alarm Display / Remote Indicator 17
5.7.1 Remote Indicator FAA-420-RI 18
5.7.2 External Detector Alarm Display MPA 19
5.8 Accessories for Service und Detector Testing 21
6 Order Overview 24
6.1 Detector Variants 24
6.1.1 Detectors with 820 Ohm Alarm Resistor 24
6.1.2 Detectors with 470 Ohm Alarm Resistor* 24
6.2 Detector Bases 24
6.3 Detector Accessories 24
6.4 Installation Accessories 25
6.5 Detector Base Sounders 25