EasyManua.ls Logo

Bosch FCP-320 - Smoke and Heat Detectors Specs

Bosch FCP-320
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30 en | Specifications Conventional Automatic Detectors
F.01U.002.707 | 8.0 | 2011.10 Operation Guide Bosch Sicherheitssysteme GmbH
Smoke and Heat Detectors
Response Sensitivity of the Thermal Differential Unit According to EN 54-5
Device Type FCP-O320/FCP-O320-
R470
FCH-T320/
FCH-T320-R470/
FCH-T320-FSA
Detection principle Scattered light
measurement
Measurement of absolute temperature and
temperature increase
Special features Drift compensation of
optical sensor
For Fire Barriers
conforming to DIBt,
Quality-controlled
Operating voltage 8.5 V DC to 30 V DC
Current consumption < 0.12 mA
Individual display LED red
Alarm output Current increase (alarm resistor approx. 820 Ω or 470 Ω)
Indicator output Open collector, connects through 0 V via 3.92 kΩ, max. 8 mA
Response sensitivity (basic
data)
< 0.15 dB/m (EN54-7) Class A2R acc. to
EN 54-5
–Thermal max. unit:
> 54 °C
Thermal diff. unit:
refer to table
Page 30
Class A1R acc. to
EN 54-5V
Thermal max. unit:
> 54 °C
Thermal diff. unit:
refer to table
Page 30
Max. monitoring range
120 m
2
(observe VdS
guidelines)
40 m
2
(observe VdS guidelines)
Maximum installation height 16 m (observe VdS
guidelines)
6 m (observe VdS guidelines)
Permissible air speed 20 m/s
Permissible operating temp. -20 °C . . . +65 °C -20 °C . . . +50 °C
Permissible relative humidity < 95% (non-condensing)
Protection category according
to EN 60529
IP 40
IP 43 with detector base with damp room seal
Color code - Red ring
Dimensions without base
Dimensions with base
circumference 99,5 x 52 mm
circumference 120 x 63,5 mm
Housing material / color ABS / white, similar to RAL 9010, matte surface
Weight without packaging
Weight with packaging
approx. 75 g
approx. 115 g
Product ID F.01U.026.293/
F.01U.029.857
F.01U.026.291/
F.01U.029.861
F.01U.026.294
Temperature Rate of
Rise [K min
-1
]
Response Time for Detectors in the
Sensitivity Class A1R
Response Time for Detectors in the
Sensitivity Classes A2R
Lower Limiting
Value [min/sec]
Upper Limiting
Value [min/sec]
Lower Limiting
Value [min/sec]
Upper Limiting
Value [min/sec]
10 1 min 4 min 20 s 2 min 5 min 30 s

Related product manuals