EasyManua.ls Logo

Bosch FEL023MS2 - Installation and Connection; Required Safety Clearances; Electrical Connection Guide

Bosch FEL023MS2
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Environmental protection and saving energy
6
If you prepare several bags of microwave popcorn in
immediate succession at a microwave power level that
is too high, the cooking compartment may be dam-
aged.
Leave the appliance to cool down for several
minutes between each use.
Never set a microwave power level that is too high.
Use a maximum microwave output of 600 watts.
Always place the popcorn bag on a glass plate.
The microwave feed is damaged by the removal of the
cover.
Never remove the cover of the microwave feed in
the cooking compartment.
Removing the transparent film from the inside of the
door damages the appliance door.
Never remove the transparent film on the inside of
the door.
Liquid that penetrates the interior of the appliance may
damage the turntable drive.
Monitor the cooking process.
Set a shorter cooking time first and, if necessary, in-
crease the cooking time.
Never use the appliance without the turntable.
Using unsuitable cookware may result in damage.
When using the grill, the microwave combi mode or
the hot air, only use tableware that can withstand
the high temperatures.
3  Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Open the appliance door as little as possible during
operation.
¡
This will maintain the temperature in the cooking
compartment and eliminate the need for the appli-
ance to reheat.
Hide the clock in standby mode.
¡
The appliance saves energy in standby mode.
Note:
The appliance requires:
¡ A maximum of 1W when the appliance is in opera-
tion with the display switched on
¡ A maximum of 0.5W when the appliance is in oper-
ation with the display switched off
4  Installation and connection
4.1 Safety clearances
Comply with the safety clearances for the appliance.
4.2 Installing and connecting the appliance
WARNING‒Risk of electric shock!
Incorrect installation is dangerous.
Connect and operate the appliance only in accord-
ance with the specifications on the rating plate.
Connect the appliance to a power supply with al-
ternating current only via a properly installed socket
with earthing.
The protective conductor system of the domestic
electrical installation must be properly installed.
Never equip the appliance with an external switch-
ing device, e.g. a timer or remote control.
When installing the appliance, check that the power
cable is not trapped or damaged.
If the insulation of the power cord is damaged, this is
dangerous.
Never let the power cord come into contact with hot
appliance parts or heat sources.
Never let the power cord come into contact with
sharp points or edges.
Never kink, crush or modify the power cord.

Related product manuals