Bosch Flexidome IP 4000i User Manual

1 2 3 4 5
6 7 8 9
6x30
4.5x40
x4
x4
T20
Mounted
Desiccant
NPT¾
M25
M20
6x30
4.5x40
x2
x2
FLEXIDOME IP 4000i/5000i
NDE-4502-A | NDE-4502-AL
NDE-5503-A | NDE-5503-AL
Quick Installation Guide
Conduit attachment
FLEXIDOME IP 3000i/4000i/5000i
Quick Installation Guide
x4
IR version
microSD card
(not included)
Menu
Reset
Desiccant
Ø 6 ~ 7 mm
Ø6 mm
x4
x4
Ø6 mm
56
32
x4
4.5 x 40
7 mm
(0.3 in)
12 VDC/
24 VAC
SELV
Class 2
24-28 AWG
RJ45
Ethernet (PoE)
Default: DHCP on
(no DHCP: Auto-IP
169.254.x.x)
8 mm
(0.3 in)
CVBS
BNC
SMB
connector
AUDIO ALARM
OUT OUT OUTGND GND GNDIN IN
24-28 AWG
NBN-MCSMB
(optional)
not included
Pan
350°
Tilt
130°
Twist
330°
T20
Do not position light
sensor below edge of
cover (IR only).
x2
Menu
On
180°
Default
Focus
Zoom OK
Zoom (0-6)
Focus & Zoom OK
- autofocus
- autofocus
>2s
>2s
>2s
<2s
<2s
<2s
<2s
<2s
<2s
<2s
Analog format
<2s
Output OK
CVBS
x4

Bosch Flexidome IP 4000i Specifications

General

Video Compression	H.265, H.264, MJPEG
Operating Temperature	-30°C to +50°C (-22°F to +122°F)
Ingress Protection	IP66
Vandal Resistance	IK10
Smart Features	Intelligent Video Analytics
Lens	Varifocal
Image Sensor	1/2.8" CMOS
Day/Night	Yes
IR Range	Up to 30 meters
Power Supply	PoE (802.3af), 12 VDC
Frame Rate	Up to 30 fps

Summary

Camera Installation and Connectivity

Physical Components and Ports

Overview of camera body, mounting options (NPT, M25), and various connectors (SMB, BNC, AUDIO, CVBS, ALARM).

Mounting Procedure

Instructions for attaching the camera, including screw types, desiccant placement, and hole sizes for mounting.

Network and Power Connections

Details on connecting the camera via RJ45 (Ethernet/PoE) and power options (12 VDC/24 VAC).

Camera Movement and Adjustment

Specifies the Pan (350°), Tilt (130°), and Twist (330°) ranges and notes on light sensor positioning.

Menu-Driven Configuration

Guide to using the menu system for autofocus, zoom control, and output confirmation.

Software Setup and Configuration

IPHelper Tool Usage

Instructions for using the IPHelper tool for device discovery and network configuration.

Lens Wizard Configuration

Guide to setting up camera lens parameters using the Lens Wizard for optimal image capture.

Zoom and Focus Adjustment

Steps for performing manual optical zoom and focus adjustments on the camera.

Video Viewing and Management

Guidance on viewing video streams and configuring camera settings via client software.