Need help?Do you have a question about the Bosch FLEXIDOME IP NIN-70122 and is the answer not in the manual?
Explains the meaning of Caution and Notice symbols used in the manual.
Provides essential safety guidelines for installation and handling of the device.
Detailed list of safety instructions to be followed before operating the device.
Details regulatory compliance information for FCC and ICES standards.
Contains important notices regarding optical elements, video loss, and memory card usage.
Information regarding trademarks used within the document.
Provides contact details and website for additional product information.
Describes different camera configurations for optimum performance in specific environments.
Explains how to access camera features and settings via a web browser.
Details how the camera interacts with recording solutions and software like VRM and Video Security Client.
Information on using the Bosch Video Management System for enterprise surveillance.
Details on integrating the camera with third-party systems and accessing IVA metadata.
Instructions for carefully unpacking the equipment and verifying all parts are included.
Lists all items included in the product packaging.
Specifies the recommended computer hardware and software for optimal camera viewing.
Guidance on using SD cards for alarm recording and minimizing data loss risks.
Step-by-step instructions for flush mounting the camera in a ceiling.
Step-by-step instructions for flush mounting the camera in a ceiling.
Procedure for connecting the camera body to the mounting ring securely.
Instructions for mounting the camera using a Surface Mount Box (SMB).
Guidance for wall mounting the camera, emphasizing orientation and alignment points.
Steps to safely loosen and detach the camera from its mounting.
Procedure for disconnecting the camera and removing it from the mounting ring.
Instructions for resetting the mounting screws for correct camera remounting.
Details on connecting the camera to a 10/100 Base-T network using PoE.
How to connect to and configure the camera using a web browser.
Steps to establish an IP connection and initial browser configuration.
Information on the IP Helper tool for detecting Bosch cameras on the network.
Configuration steps for connecting the unit to a protected network with RADIUS authentication.
Details on the Bosch Video Client application for managing cameras.
Information on the Video Security Client application for monitoring IP cameras.
Explanation of the LED indicators on the camera and their meanings.
A table listing common malfunctions, their possible causes, and solutions.
Troubleshooting steps for issues with audio transmission to remote stations.
Troubleshooting steps for when the unit fails to report alarms.
Troubleshooting steps for camera operational issues following a firmware upload.
Troubleshooting ActiveX component issues when a red cross placeholder is displayed.
Troubleshooting steps when web browser fields appear empty.
Troubleshooting steps when the camera LED flashes red, indicating firmware upload failure.
How to use the ping command to test network connectivity for the device.
Information on contacting customer service and obtaining firmware version details.
General guidelines for cleaning the camera, including recommended materials.
Specific instructions for cleaning the camera lens to maintain optimal performance.
Information regarding repairs and a notice not to open the unit casing.
Instructions for using the factory reset button to restore the unit to its original settings.
Guidelines for passing on the unit with its installation guide.
Information on the proper disposal of the product according to environmental regulations.
Detailed technical specifications of the camera, including power, sensor, and video performance.
Details on the camera's dynamic range capabilities.
Information on video compression, streaming capabilities, delay, and encoding interval.
Resolution details for the 180° version of the camera across different channels.
Resolution details for the 360° version of the camera across different channels.
Resolution details for the 360° version of the camera across different channels.
Details on various video processing functions like Day/Night, White Balance, and Noise Reduction.
Details on video functions like Privacy Masking, Analytics, and Pre-positions.
Specifications related to the camera lens, mount, iris control, and field of view.
Information on audio codecs, sampling rates, and streaming modes.
Details on internal RAM for pre-alarm recording and memory card slot specifications.
Information on unit configuration, firmware updates, and software viewers.
List of network protocols supported by the camera.
Details on the encryption standards used by the camera.
Information on Ethernet connection type and ONVIF compliance.
Dimensions and weight of the camera.
Operating and storage temperature, humidity, and vandal resistance ratings.
To Next Page
General