<;4*<?8=6202&B==<?A
<;4 D<?8=6202@ 5.C2 .
A
2;12;0F A< A6= <C2? B;92@@
09.:=21 1<D; .;1 =?<=2?9F @B==<?A21 3?<:
B;12?;2.A5
#=2?.A6;4 .@2 EA2;@6<;@ – These extensions
provide extra workpiece support and are especially
useful when cutting long workpieces. To reposition
the extensions, simply unlock the base extension
lock levers, reposition the extensions and relock the
levers (see Figure 35). The left extension lock lever
tightens by rotating clockwise and the right lock lever
tightens by rotating counterclockwise.
64B?2&9616;4.@2EA2;@6<;@
116A6<;.9*<?8=6202&B==<?A
9<08@ – Long pieces need extra support. The base
h
eight (3-3/4") is designed to match the standard
lumber of two 2xs and one 1x. Boards of these
thicknesses can be used to create auxiliary support
extensions for long workpieces (see Figure 36).
64B?29<08&B==<?A
*%""
!
To Next Page
Loading...
