English | 9
Bosch Power Tools 1 609 929 S36 | (17.10.08)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Handle
2 On/Off switch
3 Tool arm
4 Depth stop
5 Lock nut of the depth stop
6 Transport safety-lock
7 Angle stop bolts
8 Box-end wrench
9 Base plate
10 Retracting blade guard
11 Spindle lock
12 Cutting disc*
13 Angle stop
14 Clamping spindle
15 Quick release
16 Spindle handle
17 Transport handle
18 Tool spindle
19 Clamping flange
20 Washer
21 Hexagon socket screw
22 Lock-on button
23 Cover lid
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Cut off grinder GCO 2000
Professional
Article number
3 601 L17 ...
... 041
... 0B1
... 0L1
... 0K1
... 0C1
Rated power in-
put
W20001650
No-load speed
rpm 3500 3500
Weight, appox.
kg 17 17
Protection class
/II /II
Maximum workpiece dimensions, see page 12.
Starting cycles generate brief voltage drops. Interfer-
ence with other equipment/machines may occur in
case of unfavorable mains system conditions. Malfunc-
tions are not to be expected for system impedances be-
low 0.15 ohm.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your power tool. The trade names of individual tools
may vary.
Dimensions of suitable cutting discs
Cutting disc diameter
mm 355
Cutting disc mounting hole
mm 25.4
OBJ_BUCH-385-005.book Page 9 Friday, October 17, 2008 10:39 AM
To Next Page
Loading...
