Bosch GIC4-23C - English; Table of Contents

-2-
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to po-
tential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
General Safety Rules ................3
Safety Rules for Inspection Camera .....4
FCC Caution ......................5
Industry Canada (IC) ................6
Intended Use ......................6
Symbols..........................7
Getting to Know Your GIC4-23C
Inspection Camera . . . . . . . . . . . . . . . 8
Specications .....................9
Assembly ........................10
Power Supply ..................10
Fitting the Camera Cable .........11
Removing the Camera Cable.......11
Fitting the Mirror, Magnet or
Hook ......................11
Operation .......................12
Product Description .............12
Using the Product...............12
Starting Operation ..............13
Main Menu ....................13
Saving/Transferring the
Recordings .................14
Working Advice .................15
Maintenance and Service ............15
Maintenance and Cleaning ........15
Environment Protection ..........15
Troubleshooting ...................16
Errors – Causes and Corrective
Measures ..................16
Accessories ......................16