-25-
NOTE: Not recommended for use with type 11 cup wheels.
Maintenance
To avoid accidents, always disconnect the tool and/or charger from the power supply
before servicing or cleaning.
Accessories and Attachments
Standard equipment Optional accessories and attachments
- Type 27 wheel guard
- Lock nut
- Backing flange
- Side handle
- Lock nut wrench
- Type 41/1A wheel guard
- Hand guard
The use of any other attachments or acces so ries not specified in this manual may create
a hazard.
Store accessories in a dry and temperate environment to avoid corrosion and deterioration.
Service
NO USER SERVICEABLE PARTS
INSIDE. Preventive
maintenance performed by un au thorized personnel
may result in misplacing of internal wires and
components which could cause serious hazard. We
recom mend that all tool service be performed by a
Bosch Factory Service Center or Authorized Bosch
Service Station. SERVICE MEN: Disconnect tool and/or
charger from power source before servicing.
Batteries
Be alert for battery packs that are nearing their end
of life. If you notice decreased tool performance or
significantly shorter running time between charges then
it is time to replace the battery pack. Failure to do so
can cause the tool to operate improperly or damage the
charger.
Tool Lubrication
Your Bosch tool has been properly lubricated and is
ready for use.
D.C. Motors
The motor in your tool has been engineered for many
hours of dependable service. To maintain peak efficiency
of the motor, we recommend it be examined every six
months. Only a genuine Bosch replacement motor
specially designed for your tool should be used.
Cleaning
Certain cleaning agents and
solvents damage plastic parts.
Some of these are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia and household
detergents that contain ammonia.
Ventilation openings and switch levers must be kept
clean and free of foreign matter. Do not attempt to clean
by inserting pointed objects through opening.
To Next Page
Loading...
