9
1, 2, 3 series of operations
You can use the SeriesOperations function to set up to three
different microwave power settings and times and then start.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Set a cooking time for each operation in the series.
1.Set the function selector to Ý.
2.Press the 2 button.
The
ª for the first operation in the series appears on the
display.
3.Set the first microwave power setting and cooking time.
4.Press the 2 button.
The
« for the second operation in the series appears.
5.Set the second microwave power setting and cooking time.
6.Press the 2 button.
The
¬ for the third operation in the series appears.
7.Set the third microwave power setting and cooking time.
8.Press the n button.
Operation begins. The first step in the series of operations
appears in the display. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Changes can only be made before operation begins. Press the
2 button repeatedly until the number for the series of
operations appears. Change the setting.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
n
button briefly. The programme will then continue.
Pausing operation
Press the
n button briefly. The oven is paused. Press the
n button again to continue operation.
Cancelling operation
Press and hold the
n button for approximately 4 seconds or
turn the function selector to the off position.
Calling up the cooking time
Press the
0 button once.
Note.
You can also combine a type of heating with the series of
operations. Set the type of heating first.
Setting the time-setting options
Your oven has various time-setting options. You can use the 0
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The brackets [ ] show you which time-setting option
you have currently selected. A time-setting option which has
already been set can be changed directly with the
@ or A
button when the relevant time symbol is in brackets.
Timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
1.Press the 0 button once.
The time symbols light up in the display and the brackets are
around
U.
2.Use the @ or A button to set the timer duration.
Default value for
@button = 10 minutes
Default value for
Abutton = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The [
U] symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 00:00 is shown in the display. Use the
0
button to switch off the timer.
Changing the timer duration
Use the
@ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the
A button to reset the timer duration to 00:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
U timer, r cooking time, p end time or 0
clock, press the
0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.
Cooking time
The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time is not
accidentally exceeded.
Example in the picture: Cooking time 45 minutes.
1.The function selector is used to set the type of heating.
2.The temperature selector is used to set the temperature or
grill setting.
3.Press the 0 button twice.
To Next Page
Loading...
