Familiarising yourself with your appliance en
7
4.2 Buttons
Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on
and off.
Button Function Use
On/Off Switch the appliance on or off.
Start/Stop Short press: Start or pause operation.
Press and hold for approx. three seconds: Cancel operation.
4.3 Touch fields
Use the touch fields to select different functions dir-
ectly.
The touch fields on the outside of the control panel are
designed for general functions; the touch fields on the
inside of the control panel are for the cooking mode.
The touch field for the function that is currently selected
lights up red.
Touch field
on the out-
side
Function Use
Timer Select the timer.
Childproof lock Press and hold for approx. four seconds: Activate or deactivate the child-
proof lock.
Information Display additional information about a function or setting.
To call up the basic settings, press and hold this for ap-
prox.threeseconds when the appliance is switched off.
Pyrolytic self-cleaning Select the cleaning function operating mode.
Touch field
on the in-
side
Function Use
4D hot air Directly select the "4D hot air" type of heating.
Top/bottom heating Select the "Top/bottom heating" type of heating directly.
Types of heating Select the operating mode types of heating.
Temperature Select the temperature in the cooking compartment.
AutoPilot Select the AutoPilot operating mode with cooking programmes.
Weight Select the weight for the operating mode.
Time-setting options Select the time-setting options.
Rapid heating Starts or cancels rapid heating for the cooking compartment.
4.4 Control ring
You can use the control ring to change the setting val-
ues that are shown in the display.
If you have reached the maximum value for setting val-
ues, such as the temperature, minimum or maximum
value, this value remains in the display. If required, use
the control ring to turn the value back again.
For lists, e.g. the types of heating, the first value starts
again after the last value.
4.5 Display
The display shows the current setting values on differ-
ent levels.
Value in the
foreground
The value in the foreground is high-
lighted in white. You can use the control
ring to change the value directly.
Once operation has started, the temper-
ature or level is displayed in the fore-
ground.
Value in the
background
Values in the background are displayed
in grey. To change the value using the
control ring, select the required function
in advance.
Enlarge-
ment
As long as you use the control ring to
change a value, only this value will be
displayed as enlarged.
To Next Page
Loading...
Need help?
General