Bosch HBG7341 1 Series - Rapid Heating; Dishes; Favourites; Childproof Lock

en HomeConnect
16
Display Selection
Standby
screen
¡ On for a limited time
¡ On (this setting increases energy
consumption)
¡ Off
1
Clock ¡ Digital
1
¡ Analogue
Alignment ¡ Align the display horizontally and
vertically.
1
Factory setting (may vary according to model)
Tone Selection
Button tone ¡ On
1
¡ Off
Signal tone ¡ Very short duration (once)
¡ Short duration (ap-
prox.5seconds)
¡ Medium duration
(approx.10seconds)
1
¡ Long duration (ap-
prox.30seconds)
1
Factory setting (may vary according to model)
Appliance set-
tings
Selection
Fan run-on
time
¡ Minimum
¡ Recommended
1
¡ Long
¡ Very long
Pull-out system ¡ Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
1
¡ Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
Lighting ¡ When cooking and when the door
is opened
1
¡ Only when the door is opened
¡ Always off
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Brand logo ¡ Display
1
¡ Do not display
Operation after
switch-on
¡ Main menu
1
¡ Types of heating
¡ Dishes
¡ Favourites
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Elapsed cook-
ing time
¡ Do not display
¡ Display
1
Regional
dishes
¡ All
1
¡ European dishes
¡ British dishes
Dishes ¡ All
1
¡ No pork
¡ Kosher only
Childproof
lock
¡ Button lock only
1
¡ Deactivated
Automatic
rapid heating
¡ off
¡ On
1
1
Factory setting (may vary according to model)
Factory set-
tings
Selection
Factory set-
tings
¡ Restore
Info Display
Appliance in-
formation
Display technical information about
the appliance.
14.2 Changing the basic settings
1.
Press "Basic settings" in the menu.
2.
Press the required basic settings area.
3.
Press the required basic setting.
4.
Press to select the required basic setting.
a The change is applied directly for most basic set-
tings.
5.
To change additional basic settings, use to go
back and select a different basic setting.
6.
To exit the basic settings, use to go back to the
main menu or switch off the appliance using ⁠.
a The changes are saved.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
14.3 Setting the time
1.
Press "Basic settings" in the menu.
2.
Press "Time".
3.
To set the time, press the hour display or the minute
display.
a The selected value is marked in blue.
4.
Use the setting ring to set the time.
5.
To exit the basic settings, use to go back to the
main menu or switch off the appliance using ⁠.
a The time is saved.
HomeConnect
15 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.