To Next PageTo Next Page
Need help?Do you have a question about the Bosch HDD80051UC and is the answer not in the manual?
General| Color | stainless steel |
|---|---|
| Venting Type | convertible |
| Blower Type | sold separately |
| Number of Fan Speeds | 3-stage |
| CFM | blower sold separately |
| Operating Mode | convertable: ducted / recirculating |
| Duct Size | 10 inch |
| Filters | mesh |
| Sones | 2.1 |
| Remote Control | no |
| Wi-Fi | no |
| Voltage | 120 volts |
| Frequency | 60hz |
| Current | 10a |
Weight and Dimensions| Depth | 2 1/4 inch |
|---|---|
| Height | 12 inch |
| Width | 31 inch |
Emphasizes the importance of following all listed warnings and cautions for safe operation.
Provides initial checks and important notes for installers and owners regarding handling.
Covers safe handling, installation by qualified technicians, and maintenance practices.
Details precautions and actions to prevent and handle fires during operation.
Outlines responsibilities and warnings regarding children's interaction with the appliance.
Advises on proper unpacking, disposal, and care to prevent damage and corrosion.
Outlines the process and considerations before starting the installation.
Lists all necessary tools for the installation process.
Details the contents of the parts bag provided with the unit.
Describes ducting connections and recommendations for optimal performance.
Provides recommendations for ducting, including material, length, and venting.
Details cabinet requirements for different exhaust configurations and appliance fit.
Guides on measuring for cooktop, countertop, and cabinet dimensions for installation.
Provides instructions on how to accurately cut the countertop opening for the downdraft.
Details clearance requirements and placement for electric/induction cooktops.
Details clearance requirements and placement for gas cooktops.
Instructions on preparing the downdraft unit, including removing parts and covers.
Explains the process of mounting the electrical panel in an alternative location.
Step-by-step guide for installing with a flexible blower directly attached.
Instructions for installing with a remote blower via the front panel opening.
Details installing with inline/remote blowers using various ducting paths.
Guides on attaching support brackets and legs to the downdraft unit.
Instructions for measuring and cutting the cabinet for ductwork access.
Instructions for installing the unit with a specific recirculation kit.
Step-by-step process for securing the downdraft unit within the cabinet.
Details the installation of a seal kit for gas cooktop applications.
Instructions for installing external ventilation components like caps and blowers.
Guides on connecting ductwork, ensuring secure and air-tight seams.
Instructions for mounting the electrical panel if it was relocated.
Covers planning house wiring, circuit protection, and code compliance.
Provides detailed instructions for qualified persons to install electrical wiring safely.
Wiring instructions for remote blower models, including connection types and kits.
Wiring instructions for flexible blower models, including wire connections.
Guide on plugging the electrical panel cable into its receptacle.
Instructions for connecting the unit to power, ensuring cord routing.
Steps to align and install the cooking appliance with the downdraft.
Instructions on how to attach the endcaps using a special key.
Advises on preparing information for service calls and troubleshooting.
Explains where to find the data label for model and serial number information.
Provides contact information and support resources for appliance service.
Lists where to purchase replacement parts and accessories for the appliance.
