Bosch HES7052C - Complete the installation; Anti-Tip Bracket Installation; Final Checks and Power On

11

information at the front of the manual. Please be
prepared to provide the information from the data
tag on the appliance.
Data Tag


Service
1.-
justable leg supports on the bottom of the range,

2.
3.

wood or anchorless concrete screws (included).

4. 
into the receptacle.
5. 
back leg slides under the antitip bracket. Range
will sit ¾" (19 mm) away from back wall when
properly installed.
6. Carefully tip range forward to ensure that the anti
tip bracket engages the range back brace and
prevents tip-over.
7. 

, CAUTION

the wiring may be reversed. Reversed polarity can
damage the range and can result in electrical shock
hazard. Immediately switch off power at the breaker

Complete the installation
Data Plate