What to do if the "Water tank empty” indicator light (4) comes on Bosch I8 VarioComfort TDS80 Iron?
If the "Water tank empty” indicator light comes on your Bosch Iron, it means the water tank is either empty or not correctly fitted onto the appliance. To resolve this, fill the water tank or fit it correctly.
What causes loss of pressure during ironing with a Bosch I8 VarioComfort TDS80?
The loss of pressure during ironing with your Bosch Iron can be caused by water being pumped into the steam tank or the pumping sound not stopping.
What to do if my Bosch Ironed garment turns a dark color and/or sticks to the soleplate?
If your ironed garment turns a dark color and/or sticks to the soleplate of your Bosch Iron, it could be due to the selected temperature being too high, which has damaged the garment. Select a suitable temperature for the material you are ironing and clean the soleplate with a damp cloth. Another possible cause is a build up of limescale or minerals in the boiler and iron.
Why does my Bosch Iron begin to smoke when switched on?
If your Bosch Iron begins to smoke when switched on for the first time, it is completely normal. Certain components on the appliance have been lightly greased at the factory and may produce a small amount of smoke when initially heated. This will stop after a short while. If it occurs during subsequent use, the soleplate may be soiled. Clean the soleplate according to the cleaning instructions.
What to do if water leakage from the boiler Bosch I8 VarioComfort TDS80 Iron?
If there is water leakage from the boiler of your Bosch Iron, check if the boiler cap is loose. If it is, tighten the cap.
Why does the hose get hot during use of Bosch I8 VarioComfort TDS80 Iron?
The hose getting hot during use of your Bosch Iron is normal. It is caused by the steam passing through the hose during steam ironing. Place the hose on the opposite side so that you do not touch the hose during ironing.
What to do if dirt comes out through the soleplate of my Bosch I8 VarioComfort TDS80 Iron?
To address dirt coming out through the soleplate of your Bosch Iron: Clean the soleplate with a damp cloth. Carry out a cleaning cycle. Never add products to the water.
What to do if the “Calc'nClean” indicator light (3) does not turn off Bosch Iron?
If the “Calc'nClean” indicator light does not turn off on your Bosch Iron, restart and complete the iron descaling process.
Why do water spots appear on the garment during ironing with Bosch I8 VarioComfort TDS80?
Water spots may appear on the garment during ironing with your Bosch Iron because the steam release button has been activated for too long a period of time, meaning it has been pressed too frequently.
Key safety points and usage guidelines for optimal appliance performance and user protection.
Highlights the ease of use and fast results of the VarioComfort ironing system.
Guidance on how to dispose of obsolete appliances in accordance with environmental regulations.
Instructions on how to correctly fill the appliance's water tank with tap water.
Steps to connect, switch on, and heat the appliance before use.
Guidance on selecting the correct programme for different fabric types.
Details on the i-Temp program for safe ironing of all ironable fabrics.
Information on the hygiene program for sanitizing fabrics with steam.
How to iron with steam and use the steam release button effectively.
Using the PulseSteam function for tackling difficult creases with powerful steam shots.
How to remove creases from hanging clothes using vertical steam.
How to activate and use the energy saving 'Eco' setting for reduced consumption.
Explanation of the automatic switch-off feature for safety and energy conservation.
Instructions for performing the descaling procedure to maintain appliance performance.
Step-by-step guide for descaling the steam station's boiler.
Instructions on how to clean the removable limescale collector.
Procedure for descaling the iron itself to remove internal deposits.
General cleaning instructions for the iron and its soleplate.
Explanation for smoke during initial operation and how to address soiled soleplates.
Troubleshooting water condensation or leakage through soleplate holes.
Resolving issues with dirt or mineral deposits coming out of the soleplate.
Troubleshooting if the Calc'nClean indicator light does not turn off.
Addressing garment discoloration or sticking due to incorrect temperature settings.
Understanding the appliance's pumping sound and when to contact service.
Tips for maintaining pressure during ironing and avoiding water spots.
Information on hose temperature and resolving boiler water leakage issues.
Resolving issues with the 'Water tank empty' indicator light.
General| Power | 2400 W |
|---|---|
| Steam output | 120 g/min |
| Water tank capacity | 1.8 L |
| Type | Steam generator iron |
| Auto shut-off | Yes |
| Self-cleaning | Yes |
| Anti-drip system | Yes |
| Anti-calc system | Yes |
| Features | VarioComfort |
| Soleplate material | CeraniumGlissée |
To Next Page