What to do if the "Water tank empty” indicator light (4) comes on for Bosch VarioComfort 8?
If the "Water tank empty” indicator light comes on, the water tank may be empty or not correctly fitted. You should fill the water tank or fit it correctly.
Why does my Bosch VarioComfort 8 Iron begin to smoke when switched on?
The iron may smoke when first used because certain components have been lightly greased at the factory. It is also possible that the soleplate is soiled. Point the iron away from the ironing area and press the steam release button until steam is produced. If the problem persists, clean the soleplate according to the cleaning instructions.
What to do if the ironed garment turns a dark colour or sticks to the soleplate of my Bosch VarioComfort 8?
If the ironed garment turns a dark color or sticks to the soleplate, it may be because the selected temperature is too high and has damaged the garment, or the iron descaling process has been stopped before being completed. Select a suitable temperature for the material being ironed and clean the soleplate with a damp cloth.
What to do if the “Calc'nClean” indicator light (3) does not turn off on my Bosch VarioComfort 8?
If the “Calc'nClean” indicator light does not turn off, it may be because a cleaning cycle needs to be carried out, or products have been added to the water. Restart and complete the iron descaling process. Never add products to the water.
Why does water flow through the holes on the soleplate of my Bosch Iron?
Water may flow through the holes on the soleplate because water is condensing inside the tubes, especially if steam is being used for the first time or has not been used for a long time.
Why does my Bosch VarioComfort 8 make a pumping sound?
The appliance may make a pumping sound because there is a build up of limescale or minerals in the boiler and iron. If the sound does not stop, do not use the steam station and contact an authorised technical service centre.
Why is there loss of pressure during ironing with my Bosch VarioComfort 8 Iron?
Loss of pressure during ironing may occur if the steam release button has been activated for too long or pressed too frequently.
Why does the hose get hot during use of my Bosch VarioComfort 8 Iron?
The hose may get hot during use because steam is passing through it during steam ironing. Place the hose on the opposite side so that you do not touch it during ironing.
What causes water spots to appear on the garment during ironing with my Bosch Iron?
Water spots may appear on the garment during ironing due to steam condensed on the ironing board.
What to do if there is water leakage from the boiler of my Bosch VarioComfort 8?
If there is water leakage from the boiler, the boiler cap may be loose. Tighten the cap.
Instructions for filling the water tank with tap water and important notes on additives.
Steps to heat up the steam station, including plugging in and selecting fabric type.
Details on selecting programmes for different fabric types and special programmes.
Guidance on ironing with steam, including special functions like PulseSteam.
Information on activating and using the energy-saving 'Eco' mode for efficient ironing.
Explanation of the automatic shut-off feature for safety and energy saving.
Procedure for descaling the boiler, collector, and iron to maintain performance.
Instructions for cleaning the appliance, including the soleplate, for proper maintenance.
General| Type | Steam Iron |
|---|---|
| Cord Length | 2.5 m |
| Vertical Steam | Yes |
| Anti-Calc System | Yes |
| Drip-Stop System | Yes |
| Auto Shut-Off | Yes |
| Self-cleaning | Yes |
| Anti-drip System | Yes |
| Soleplate Material | Ceramic |
To Next Page