Bosch ICP-SOL2-P - 4.1.5 Area Menu; 4.1.6 Output Menu; 4.1.7 Communication Menu

Area Menu
[ I ] 5 Area [ I ] 51 Codepad Area
[ I ] 52 Area Option [ I ] 521 Arm/Disarm All Areas Once
[ I ] 522 Reset Siren From Any Area
Table 4.6: Area Menu
Output Menu
[ I ] 6 Output [ I ] 61 Onboard Output
[ I ] 62 Codepad Output
[ I ] 63 Extend Output
[ I ] 64 Siren Config [ I ] 641 Siren Run Time
[ I ] 642 Siren Run Rate
[ I ] 643 Siren Sound On RF Receiver Fail
Table 4.7: Output Menu
Communication Menu
[ I ] 7 Comm [ I ] 71 Receiver
Config
[ I ] 72 Network
Config
[ I ] 721 Network Module
[ I ] 722 A-Link/RSC PSWD
[ I ] 723 IP Destination
[ I ] 724 CSVIP User Name And Password
[ I ] 73 Report
Config
[ I ] 731 STAY Mode Report Enable
[ I ] 732 Report Only After Alarm
[ I ] 733 First Disarm/Last Arm Report
[ I ] 734 Arm/Disarm Report Option
[ I ] 735 Codepad Report Option
[ I ] 736 Test Report Time And Interval
[ I ] 737 Test Report Only When Armed
[ I ] 738 Test Report On Siren Reset
[ I ] 739 Test Report Dialer Option
4.1.5
4.1.6
4.1.7
Control Panel Operation with TEXT LCD Codepad | en 13
Bosch Security Systems, Inc. User's Guide 2014.05 | 01 | F01U298028