Digit Required Number to Program Digit Required Number to Program
0 0 8 8
1 1 9 9
2 2 10 0
3 3 * * 1
4 4 # * 2
5 5 4-sec Pause * 3
6 6
7 7 Terminator * 5
Table 5.6: Domestic Dialing Telephone Digits
Programming Domestic Telephone Numbers
If your system is set up for domestic dialing, any Master Code holder can program telephone
numbers that the control panel calls in the event of an alarm.
How to Program Telephone Numbers
1. Enter your Master Code, followed by the [2] and [#] keys (for example, [25802#]). Three
beeps sound and the STAY and AWAY indicators flash.
2. Enter the any telephone number you need and press the [#] keys (for example, [1#]).
– If there is telephone number already programmed, they display one digit at a time by
the codepad indicators and end with indicator [15].
– If there are no telephone numbers programmed, indicator [15] displays and two
beeps sound.
3. Enter all digits of the telephone number (for example, [96721717]). As each digit is
entered, the corresponding codepad indicators display.
4. Press the [#] key to exit from this function.
If there is more than one telephone number to program, repeat step 1 to 4.
Disable Domestic Dialing
To cancel domestic dialing (for example, you are moving and do not want the system to
continue calling your mobile phone), enter the following sequence.
1. Enter your Master Code, followed by the [2] and [#] keys (for example, [25802#]). Two
beeps sound and the STAY and AWAY indicators flash.
2. Enter the telephone number you need to cancel and press the [#] keys (for example,
[1#]).
3. Press the [*] key followed by the [5] and [#] keys(for example, [*5#]). The STAY and
AWAY indicators are disabled.
5.16.2
5.16.3
26 en | Operation with ICON LCD Codepad Control Panel
2014.05 | 01 | F01U298028 User's Guide Bosch Security Systems, Inc.
To Next Page
Loading...
